×



Home Reports / Case Studies / Blogs
☰ Menu

E4B
E4B Consult
Electrical power design and consulting

Reports / Case Studies / Blogs

Investigating power control in a voltage source converter

The converters used to connect DC generators such as solar PV and BESS to the AC grid must be able to control power flow. It is shown that control signals into the converter can control the magnitude and direction of active and reactive power in a converter fed generator.

Read ...

Modelling mains, solar PV and BESS in a large, commercial building

In a building with mains and on-site renewable energy sources, load flows in the system are complex. Using a software model, the system is simulated over a 24 hour period and analysed from an electrical engineering perspective.

Read ...

Integrating a commercial scale solar PV system at 11kV

Distributed, renewable energy generation presents significant challenges to utility network operators. A case study shows that similar challenges exist in large building services.

Read ...

Investigating selectivity in a low and medium voltage installation

Selectivity between circuit protective devices is important in life-safety and mission-critical electrical installations. It can be achieved by adjusting the operating characteristics of trip units and relays. A case study is modelled in Protect HV, and the selectivity study is presented.

Read ...

Contact

Enquiries are welcome from M&E contractors, consultants and renewable energy system developers.
How can we support you with your electrical design tasks?

Contact details here ...